Zinc

Shelf Prime Zinc Die Cast Dross

admin — Mon, 10 Sep 2007 07:48:16 GMT

Shelf Prime Zinc Die Cast Dross

Shelf PRIME ZINC DIE CAST DROSS

Shall consist ofmetal skimmed fromthe top of pot of molten zinc die castmetal. Must be unsweated, unfluxed, shiny, smooth, metallic and free from corrosion
or oxidation. Should be poured inmolds or in smallmounds weighing not over 75 pounds each. Zinc

Scribe CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP

admin — Mon, 10 Sep 2007 07:43:01 GMT

Scribe CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP

Scribe CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP,

AS PRODUCED FROM AUTOMOBILE FRAGMENTIZERS
To be clean, free of dirt, oil, glass, rubber, and trash. To contain a maximum of 5%unmeltables such as free iron, copper, aluminum and other metals.

Screen NEW Zinc Clippings

admin — Mon, 10 Sep 2007 07:40:17 GMT

Screen NEW Zinc Clippings

Screen NEW ZINC CLIPPINGS

Shall consist of any new pure zinc sheets or stampings free from corrosion. To contain no foreign material or attachments. Printers zinc, such as engravers zinc, lithograph sheets and addressograph plates subject to special arrangements. Printers zinc to be free of routings.

Score OLD SCRAP ZINC

admin — Mon, 10 Sep 2007 06:29:01 GMT

Score OLD SCRAP ZINC

Score OLD SCRAP ZINC

Shall consist of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anti-corrosion plates. Borings and turnings are not acceptable. Material must not be excessively corroded or oxidized. All foreign attachments and extraneous materials are deductible.

Scabs New Zinc Die Cast Scrap

admin — Mon, 10 Sep 2007 06:25:28 GMT

Scabs New Zinc Die Cast Scrap

Scabs NEW ZINC DIE CAST SCRAP

Shall consist of new or unused, clean, zinc base die castings. Castings to be unplated, unpainted, and free from corrosion.

Saves OLD ZINC DIE CAST SCRAP

admin — Mon, 10 Sep 2007 06:21:44 GMT

Saves OLD ZINC DIE CAST SCRAP

Saves OLD ZINC DIE CAST SCRAP

Shall consist ofmiscellaneous old zinc base die castings, with or without iron and other foreign attachments.
Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30%iron will not constitute good delivery.