Aluminium

Twang INSULATED ALUMINUM WIRE SCRAP

admin — Sat, 08 Sep 2007 04:10:19 GMT

Twang INSULATED ALUMINUM WIRE SCRAP

Twang INSULATED ALUMINUM WIRE SCRAP

Shall consist of aluminum wire scrap with various types of insulation. To be sold on a sample or recovery basis, subject to arrangement between buyer and seller.
iron, dirt, oil, grease and other non-metallic items.

Trump ALUMINUM AUTO CASTINGS

admin — Sat, 08 Sep 2007 03:59:22 GMT

Trump ALUMINUM AUTO CASTINGS

Trump ALUMINUM AUTO CASTINGS

Shall consist of all clean automobile aluminum castings of sufficient size to be readily identified and to be free from iron, dirt, brass, bushings, and non-metallic items.
Oil and grease not to total more than 2%.between the buyer and seller.

Troma Aluminum Auto or Truck Wheels

admin — Sat, 08 Sep 2007 03:57:32 GMT

Troma Aluminum Auto or Truck Wheels

Troma Aluminum Auto or Truck Wheels

Shall consist of clean, single-piece, unplated aluminum wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil
and other non-metallic items. Variations to this specification should be agreed upon prior to shipment

Tread SEGREGATED NEW ALUMINUM CASTINGS, FORGINGS AND EXTRUSIONS

admin — Sat, 08 Sep 2007 03:55:17 GMT

Tread SEGREGATED NEW ALUMINUM CASTINGS, FORGINGS AND EXTRUSIONS

Tread SEGREGATED NEW ALUMINUM CASTINGS, FORGINGS AND EXTRUSIONS

Shall consist of new, clean, uncoated aluminum castings, forgings, and extrusions of one specified alloy only and to be free from sawings, stainless steel, zinc,

Tough MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS

admin — Sat, 08 Sep 2007 03:53:28 GMT

Tough MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS

Tough MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS

Shall consist of new, clean, uncoated and unpainted aluminum scrap of two or more alloys with a minimum thickness of .015" (.38mm) and to be free of hair wire,
wire screen, dirt and other non-metallic items. Oil and grease not to total more than 1%. Also free from punchings less than 1/2" (1.27 cm) in size.

Tooth SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS

admin — Sat, 08 Sep 2007 03:50:42 GMT

Tooth SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS

Tooth SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS

Shall consist of new, clean, uncoated and unpainted aluminum scrap of one specified aluminum alloy with a minimum thickness of .015" (.38mm) and to be free of
hair wire, wire screen, dirt and other non-metallic items. Oil and grease not to total more than 1%. Also free from punchings less than 1/2" (1.27 cm) in size.

Throb SWEATED ALUMINUM

admin — Sat, 08 Sep 2007 03:48:50 GMT

Throb SWEATED ALUMINUM

Throb SWEATED ALUMINUM

Shall consist of aluminum scrap which has been sweated or melted into a form or shape such as an ingot, sow or slab for convenience in shipping; to be free from corrosion, dross or any non-aluminum inclusions.

Tetra NEW COATED ALUMINUM FOIL

admin — Sat, 08 Sep 2007 03:46:28 GMT

Tetra NEW COATED ALUMINUM FOIL

Tetra NEW COATED ALUMINUM FOIL

Shall consist of new aluminum foil coated or laminated with ink, lacquers, paper, or plastic. Material shall be clean, dry, free of loose plastic, PVC and other nonmetallic
items. This foil is sold on ametal content basis

Terse NEW ALUMINUM FOIL

admin — Sat, 08 Sep 2007 03:44:37 GMT

Terse NEW ALUMINUM FOIL

Terse NEW ALUMINUM FOIL

Shall consist of clean, new, pure, uncoated 1000 and/or 3000 and/or 8000 series alloy aluminum foil, free from anodized foil, radar foil and chaff, paper, plastics, or any other non-metallic items. Hydraulically briquetted material and other alloys by agreement between

Tense MIXED ALUMINUM CASTINGS

admin — Sat, 08 Sep 2007 03:42:35 GMT

Tense MIXED ALUMINUM CASTINGS

Tense MIXED ALUMINUM CASTINGS

Shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.

Telic MIXED ALUMINUM BORINGS AND TURNINGS

admin — Sat, 08 Sep 2007 03:40:37 GMT

Telic MIXED ALUMINUM BORINGS AND TURNINGS

Telic MIXED ALUMINUM BORINGS AND TURNINGS

Shall consist of clean, uncorroded aluminum borings and turnings of two or more alloys and subject to deductions for fines in excess of 3%through a 20 mesh screen and dirt, free iron, oil, moisture and all other non-metallic items. Material containing iron in excess of 10% and/or free magnesium or stainless steel or containing highly flammable cutting compounds will not constitute good delivery.

To avoid dispute, material should be sold on basis of definite maximum zinc, tin and magnesium content.

Teens SEGREGATED ALUMINUM BORINGS AND TURNINGS

admin — Sat, 08 Sep 2007 03:37:40 GMT

Teens SEGREGATED ALUMINUM BORINGS AND TURNINGS

Teens SEGREGATED ALUMINUM BORINGS AND TURNINGS

Shall consist of aluminum borings and turnings of one specified alloy. Material should be free of oxidation,dirt, free iron, stainless steel, magnesium, oil, flammable liquids, moisture and other non-metallic items.

Fines should not exceed 3%through a 20mesh (U.S.standard) screen.

Tassel OLD MIXED ALUMINUM WIRE AND CABLE

admin — Fri, 07 Sep 2007 09:45:12 GMT

Tassel OLD MIXED ALUMINUM WIRE AND CABLE

Tassel OLD MIXED ALUMINUM WIRE AND CABLE

Shall consist of old, unalloyed aluminum wire and cable which may contain up to 10% 6000 series wire and cable with not over 1%free oxide or dirt and free from hair wire, wire screen, iron, insulation and other nonmetallic items.

Tann NEW MIXED ALUMINUM WIRE AND CABLE

admin — Fri, 07 Sep 2007 09:41:54 GMT

Tann NEW MIXED ALUMINUM WIRE AND CABLE

Tann NEW MIXED ALUMINUM WIRE AND CABLE

Shall consist of new, clean, unalloyed aluminum wire or cable which may contain up to 10% 6000 series wire and cable free from hair wire, wire screen, iron, insulation
and other non-metallic items.

Talon NEW PURE ALUMINUM WIRE AND CABLE

admin — Fri, 07 Sep 2007 09:40:09 GMT

Talon NEW PURE ALUMINUM WIRE AND CABLE

Talon NEW PURE ALUMINUM WIRE AND CABLE

Shall consist of new, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, iron, insulation and other non-metallic items.

Tally ALL ALUMINUM RADIATORS FROM AUTOMOBILES

admin — Fri, 07 Sep 2007 09:37:21 GMT

Tally ALL ALUMINUM RADIATORS FROM AUTOMOBILES

Tally ALL ALUMINUM RADIATORS FROM AUTOMOBILES

Shall consist of clean aluminum radiators and/or condensers.
Should be free of all other types of radiators.
All contaminants including iron, plastic, and foam not to exceed 1% of weight. Any deviation to this specification, including oxidation and aluminum content, to be
negotiated between buyer and seller.

Tall.jpg

admin — Fri, 07 Sep 2007 09:35:08 GMT

Tall.jpg

Tall E.C. ALUMINUM NODULES

Shall consist of clean E.C. aluminum, chopped or shredded, free of screening, hair-wire, iron, copper, insulation and other non-metallic items.Must be free of minus 20 mesh material. Must contain 99.45%aluminum content.

Talk ALUMINUM COPPER RADIATORS

admin — Fri, 07 Sep 2007 09:32:17 GMT

Talk ALUMINUM COPPER RADIATORS

Talk ALUMINUM COPPER RADIATORS

Shall consist of clean aluminum and copper radiators, and/or aluminum fins on copper tubing, free of brass tubing, iron and other foreign contamination.

Taldork BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

admin — Fri, 07 Sep 2007 09:30:00 GMT

Taldork BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Taldork BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Shall have a briquette density of 50 pounds per cubic foot (800 kg/m3) minimum. Nominal briquette size shall range from 12" to 24" (30.5 x 61 cm) x 12" to 24" (30.5 x 61 cm) in uniform profile with a variable length of 8" (20.3 cm) minimum and 48" (122 cm) maximum. Briquettes shall be bundled or stacked on skids and secured with a minimum of one vertical band per row and a minimum of one girth band per horizontal layer.

Briquettes not to overhang pallet. Total package height shall be 48 (122 cm) maximum. Banding shall be at least 5/8" (1.6 cm) wide by .020" (5mm) thick steel strapping or equivalent strength. The weight of any bundle shall not exceed 4,000 pounds (1.814 mt). Material must be magnetically separated and free of steel, plastic, glass, dirt and all other foreign substances. Any and all aluminum items other than UBC are unacceptable. Any free lead is basis for rejection. Items not covered in the specification, including moisture, and any variations to this specification should be agreed uponprior to shipment between the buyer and seller.

Taldon BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

admin — Fri, 07 Sep 2007 09:26:58 GMT

Taldon BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Taldon BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Shall have aminimum density of 14 pounds per cubic foot (225 kg/m3), and a maximum density of 17 pounds per cubic foot (273 kg/m3) for unflattened UBC and 22
pounds per cubic foot (353 kg/m3) for flattened UBC.

Size: Minimum 30 cubic feet (.85m3), with bale range dimensions of 24" to 40" (61 to 132 cm) by 30" to 52"(76 to 132 cm) by 40" to 84"(102 to 213 cm).

The only acceptable tying method shall be as follows: four to six 5/8" (1.6 cm) x .020" (5mm) steel bands, or six to ten #13 gauge steel wires (aluminum bands or wires are acceptable in equivalent strength and number). Use of skids and/or support sheets of any material is not acceptable. Must bemagnetically separated material
and free of steel, lead, bottle caps, plastic cans and other plastic, glass, wood, dirt, grease, trash, and other foreign substances. Any free lead is basis for rejection.
Any and all aluminum items, other than used beverage cans, are not acceptable.

Variations to this specification should be agreed upon prior to shipment between the buyer and seller.